TY  - JOUR
T1  - Prediction and Optimization of Machining Parameters for Cutting
Al6061/MoS<sub>2</sub> MMC Material by WEDM Process
AU - Geeta Rani, M. AU - Parameswara Rao, Ch.V.S. AU - Rama Kotaiah, K. 
JO  - Journal of Engineering and Applied Sciences
VL  - 13
IS  - 20
SP  - 8483
EP  - 8488
PY  - 2018
DA  - 2001/08/19
SN  - 1816-949x
DO  - jeasci.2018.8483.8488
UR  - https://makhillpublications.co/view-article.php?doi=jeasci.2018.8483.8488
KW  - WEDM
KW  -Al 6061/MoS MMC
KW  -surface roughness
KW  -MRR
KW  -RSM origin
KW  -mathematical correlations
AB  - Wire cut Electric Discharge Machining (WEDM) is a vital technology which is required for high speed cutting and high precision machining to enhance productivity and accuracy for manufacturing of press tools, moulds, prototype parts and complicated contours etc. The machining system involves many input parameters effecting output. The main objective of this research is to determine the optimum values of machining parameters for attaining economical and competent performance for machining Al6061/MoS<sub>2 </sub>Metal Matrix Composite (MMC). The MMC material was made by stir casting process and the specimen were prepared for machining as well as testing. The cutting operations were carried out on WEDM by varying the machining current on work pieces of thickness ranging from 5-80 mm. The surface roughness value was measured using Talysurf. The Material Removal Rate (MRR) was computed by measuring cutting width using profile projector. The optimal current value at which the machining is stable with high cutting speed is identified. Mathematical correlations are developed to determine the cutting parameters, the MRR and surface roughness by using Origin software. The same parameters were analyzed using RSM technique and the results were compared. The correlations developed are useful for evaluating the machining parameters for different machining situations arising out of customer requirements and machining time calculation in turn cost of machining.
ER  -