TY  - JOUR
T1  - Improved Melting Process in Cupola Furnace and Production Loss Reduction with
Incinerator-Melt Framework
AU - A. Fidvi, Huzifa AU - M. Langde, Akash 
JO  - Journal of Engineering and Applied Sciences
VL  - 15
IS  - 24
SP  - 3793
EP  - 3804
PY  - 2020
DA  - 2001/08/19
SN  - 1816-949x
DO  - jeasci.2020.3793.3804
UR  - https://makhillpublications.co/view-article.php?doi=jeasci.2020.3793.3804
KW  - Cupola furnace
KW  -incinerator-melt enhancement framework
KW  -thaw-degree perusal model
KW  -O2-Scurtinizer model
KW  -Kiln Flicker Espial Technique
AB  - In the cupola process, the key operational goals
are to keep the iron properties within the specified limits
and to maintain the required production rate. However,
over the years it has not improved significantly and
always relied on melting processes and loss of
productivity. Therefore, it efficiently proposed a novel
Incinerator-Melt Enhancement Framework which
addresses the challenges in melting processes and loss of
productivity. This framework introduced a Thaw-Degree
perusal model it scrutinizes the melting rate based on the
selection of optimum input parameters that enhance the
melting process. In addition, an effective controller design
O<sub>2</sub>-Scurtinizer model is used to regulate the O<sub>2</sub> that
integrates simple step-response testing and nonlinear
optimization. Moreover, to handle fluctuations, it
implements the Kiln Flicker Espial Technique to judge the
stability of the furnace using the dynamic sampling
method. Finally, the proposed system effectively
enhances the melting process and the effects of variations
in the air constituents resulting in better melting
performance and reduced loss of production.
ER  -