TY  - JOUR
T1  - To the Determination of Required Power on the Drive of Movable Operating
Elements of the Universal Collector-Fodder Shredder
AU - Abilzhanuly, T. AU - Abilzhanov, D.T. AU - Alshurina, A.S. 
JO  - Journal of Engineering and Applied Sciences
VL  - 11
IS  - 6
SP  - 1379
EP  - 1386
PY  - 2016
DA  - 2001/08/19
SN  - 1816-949x
DO  - jeasci.2016.1379.1386
UR  - https://makhillpublications.co/view-article.php?doi=jeasci.2016.1379.1386
KW  - The collector-fodder shredder
KW  -the hammer rotor
KW  -the pickup mechanism
KW  -the under-pressing reel
KW  -the screw
AB  - It is offered the harvesting technology of shredded hay which essence is that the dried-up hay is selected from a swath; it is shredded, loaded in conveyors of facilities and ricked under a canopy. At the same time, it is provided decrease in specific operating costs in 2-2.5 times in comparison with swathed technology of harvesting of rough forages. It is developed for implementation of technology the collector - fodder shredder, consisting of a collector without racetrack, the adding reels, the screw and a hammer mill. As a result of theoretical researches there are received analytical expressions for determination: the required power of the propelling worm and under-pressing reels of the collector-fodder shredder. Reliability of the received analytical expressions is checked by pilot studies. Comparison of theoretical calculations and results of pilot studies was shown that a discrepancy of a calculated value of required power of the collector-fodder shredder with the actual values there are in limits 1.3-7.0% and this discrepancy with optimum productivities of the machinery makes only 1.3-2.0% that indicates on reliability of the received analytical expressions.
ER  -