TY - JOUR
T1 - Development the Performance of the Rubbery Discharge
Part in Flexo-Pump System
AU - M. Farhan, Malia AU - Y. Hassan, Nada AU - Kadum Abd-Ali, Nabel
JO - Journal of Engineering and Applied Sciences
VL - 13
IS - 24
SP - 10148
EP - 10157
PY - 2018
DA - 2001/08/19
SN - 1816-949x
DO - jeasci.2018.10148.10157
UR - https://makhillpublications.co/view-article.php?doi=jeasci.2018.10148.10157
KW - sulfenamide
KW -rubber butyl
KW -benzothiazole
KW -flexing
KW -Rheology
KW -chloroprene
KW -carbon black
KW -silica
AB - Polymer chains are reinforced by the addition of suitable reinforcement materials to improve performance properties such as mechanical, physical and chemical properties. Presents research include experimental test such as specific gravity, rheological and flexing test were used to evaluate several rubber recipes contain natural and synthetic rubber. The reinforcing materials such as silica and carbon black were also used to enhance the bonding of the rubber chains. N, N-dicyclohexyl-2-benzothiazole-sulfonamide, N-cyclohexyl-2-benzothiazyl sulphenamide and (N-oxydiethylene-2-benzothiazole sulfenamide were used in addition two types of vulcanization system. The experimental and theoretical results were evaluated and compared with the results of the standard recipe that currently used to produce the rubbery part of flexo-pump system and showed that the increasing in the reinforcing material loading led to increasing the specific gravity, also the increasing in natural rubber loading led to increase the flexing resistance. Moreover, the use of specific grade of black carbon (such as N330) causes the similar improvement while the use of silica in specific quantities (50% of carbon black) gives different effects for all attempts. Some of new recipes gave excellent results comparing with the standard recipe. Some recipes were the safest because they have the highest scorch time ts2 while other recipe probably considered is the most economical because it has the lowest curing time ts90.
ER -