Journal of Engineering and Applied Sciences
ISSN: Online 1818-7803ISSN: Print 1816-949x
107
Views
1
Downloads
Abstract
Crankshaft is an essential part of an internal-combustion engine. In this paper, 3D Model of the crankshaft was made using solidWorks software. SolidWorks software was used to analyze the point of maximum stress and maximum deformation point of the two materials to be used in production (Ti-8AL-1Mo-1V and 40CrMnMo7). The material characteristic, crankshaft dimension and obstacle of boundary conditions were established as the constrains to the simulation. Finally, the point of maximum stress and maximum deformation point were analyzed. Moreover, static strength and fatigue evaluation of crankshaft were also done and the results obtained are used as valuable reference in the optimization and improvement to the crankshaft design.
How to cite this article:
Arifin Nur, Achmad Praptijanto, Widodo Budi Santoso, Bambang Wahono, Suherman and Muhammad Khristamto Aditya Wardana. Stress and Deformation Analysis of a Crankshaft in Range Extender Engine.
DOI: https://doi.org/10.36478/jeasci.2016.2607.2611
URL: https://www.makhillpublications.co/view-article/1816-949x/jeasci.2016.2607.2611