Environmental Research Journal
ISSN: OnlineISSN: Print 1994-5396
Abstract
Corrosion of metals has been known to be disastrous in industrial setup and even more so in the petroleum industry. Transportation of crude oil, gas and processed petroleum products takes place in pipes, most often steel pipes. Several methods have been used to combat the problem of buried pipeline corrosion among which is cathodic protection. Cathodic protection of a buried steel pipe using zinc anode and a 12 V DC power source has been studied. The experiment was set up in the laboratory for 35 days using moist soil sample from Niger Delta region of Nigeria and weight loss recorded every 7 days. Results show that after 21 days, the protected steel began to lose a very small amount of weight, compared to weight losses for unprotected steel and the anode. A total of 0.04 g of the cathodically protected steel was lost after 35 days compared to a loss of 0.43 g for the unprotected steel. The experiment shows that 90.69% protection was achieved with Cathodic Protection Method of corrosion control. The research demonstrates that buried steel pipes in Niger Delta region of Nigeria can be cathodically protected against failure with very small quantity of electricity. It is recommended that this study be carried out in a soil with high salinity, typical of the Atlantic ocean shore of Niger Delta where several oil pipelines are laid.
How to cite this article:
Emmanuel J. Ekott, Emmanuel J. Akpabio and Ubong I. Etukudo. Cathodic Protection of Buried Steel Oil Pipelines in Niger Delta.
DOI: https://doi.org/10.36478/erj.2012.304.307
URL: https://www.makhillpublications.co/view-article/1994-5396/erj.2012.304.307