Journal of Engineering and Applied Sciences
ISSN: Online 1818-7803ISSN: Print 1816-949x
Abstract
This study presents investigations into the development of control schemes for vibration suppression and end-point trajectory tracking of a flexible robot manipulator. A constrained planar single-link flexible robot manipulator is considered and the dynamic model of the system is derived using the assumed mode method. To study the effectiveness of the controllers, initially a collocated PD controller is developed for control of rigid body motion. This is then extended to incorporate a non-collocated PID controller and a feedforward controller based on input shaping techniques for control of vibration (flexible motion) of the system. For feedforward controller, the positive and modified Specified Negative Amplitude (SNA) input shapers are proposed and designed based on the properties of the system. Simulation results of the response of the manipulator with the controllers are presented in time and frequency domains. The performances of the control schemes are assessed in terms of level of vibration reduction, input tracking capability and time response specifications.
How to cite this article:
M.A. Ahmad , A.N.K. Nasir and Z. Mohamed . Techniques for Vibration Suppression and End-Point Trajectory Tracking of Flexible Robot Manipulator.
DOI: https://doi.org/10.36478/jeasci.2008.918.924
URL: https://www.makhillpublications.co/view-article/1816-949x/jeasci.2008.918.924