Journal of Engineering and Applied Sciences
ISSN: Online 1818-7803ISSN: Print 1816-949x
Abstract
In the present research, Aluminum, Magnesium, Silicon with additives of Alumina particles matrix powders were compacted using powder metallurgy method. The green compacts of both alloy (Al-Mg-Si-Cu) and composites (Al-Mg-Si-Cu/Al2O3) mixed powders were compacting using hydraulic press uniaxial at 400 MPa. The compacted mixtures Al-alloy and Al-composite were carried out by the sintering treatments at 460°C for 1.5 h. Over all the evolutions of the precipitates and hard second phases of the Al-matrixes P/M after the sintering process were examined using the X-Ray Diffraction-(XRD) and Scanning Electron Microscopy-(SEM). Outcomes of microstructural the compacted Al-PM alloy and composite investigated having a precipitations and second Al2O3 hard within the matrix during steps of sintering treatment. The highest Vickers hardness recorded of Al-Mg-Si-Cu/Al2O3p composite under sintering at 460EC.
How to cite this article:
Haider Tawfiq Naeem. Study Properties of Al-Mg-Si (6000) Matrix Composites Reinforced with
Alumina Particles Using Powder Metallurgy.
DOI: https://doi.org/10.36478/jeasci.2018.9548.9552
URL: https://www.makhillpublications.co/view-article/1816-949x/jeasci.2018.9548.9552